Yes, a Member’s Mark grill can be converted to natural gas, but it requires specific steps and components to ensure safety and functionality. In this straightforward guide, we walk you through the entire process step by step to help you convert your Member’s Mark griddle to natural gas.
Steps to Convert Member’s Mark Griddle to Natural Gas
Here we have mentioned the entire steps to convert member’s mark griddle to natural gas. By following these steps, you can safely convert Member’s Mark griddle to natural gas, ensuring a smooth and efficient cooking experience. Let’s get started!
Required Tools
First thing first, Collect all the required tools before starting the process. To save your time, We have mentioned all the necessary tools that you need.
- Blackstone Natural Gas Conversion Kit.
- 19 mm wrench or Adjustable wrench.
- 7 mm, 8 mm, or 10 mm socket wrench.
- Exacto knife or box cutter
- Vice grips
- Putty scraper
- Engine degreaser
- Two 14 to 20-inch new burners
- RectorSeal 25790 pipe thread sealant
Step 1: Remove the Griddle Top
After collecting tools Now Remove the top of the griddle to make the conversion easier.
Step 2: Disassemble the Burner Assembly
- Remove the screws holding the burner assembly in place. There are four screws that need to be removed.
- Identify the orifices in the burner assembly that need to be replaced with larger orifices to allow more gas flow.
Step 3: Replace Orifices
- Use the orifice tool from the conversion kit to remove the existing orifices.
- Compare the thread sizes of the new orifices (M6x1 and M6x0.75) to the old ones. Use the M6x1 orifices if they fit flush.
Step 4: Apply Thread Sealant
- Apply a small amount of RectorSeal 25790 thread sealant to the threads of the new orifices.
- After applying thread sealant properly, Install the new orifices in the burner assembly.
Step 5: Install New Burners
- Now Replace the original burners with the new burners.
- Make sure that the new burners fit properly over the orifices and align with the screw holes. I recommend you to use a Walmart burner, which fits properly.
Step 6: Secure Burners and Check Alignment
- Secure the new burners in place.
- Verify that the burners are seated properly over the orifices. Misalignment can cause gas leaks and is a fire hazard.
Step 7: Replace the Hose
- Use the 19 mm wrench and adjustable wrench to remove the existing propane hose.
- Accurately Apply thread sealant to the new hose fitting and install it.
Step 8: Test for Leaks
- Let the thread sealant sit for about two hours.
- Test the setup for gas leaks before fully assembling the griddle.
Step 9: Final Assembly
- Once confirmed there are no leaks, reassemble the griddle.
- Attach the griddle top and make sure everything is secure.
Experts Tips
Here we have gathered some expert tips regarding converting members’ mark griddle to natural gas.
- Always use the correct orifices and burners specified for natural gas.
- Ensure all connections are sealed properly to prevent gas leaks.
- Test the system thoroughly before use to ensure safety.
- If unsure, consult with a professional to avoid any potential hazards.
Conclusion
Yes, a Member’s Mark grill can be converted to natural gas with the right steps and components. Collect a Blackstone Natural Gas Conversion Kit, various wrenches, an Exacto knife, vice grips, a putty scraper, an engine degreaser, two new burners, and RectorSeal 25790 pipe thread sealant. Then, remove the griddle top, disassemble the burner assembly, replace the orifices, apply thread sealant, install the new burners, secure them, replace the hose, and test for leaks. Reassemble the griddle once no leaks are detected.
Faqs
Who Makes Members Mark Grills?
People often inquire about who makes Member’s Mark pallet, gas, or BBQ grills. While the exact manufacturers aren’t disclosed. Walmart, Sam’s Club’s parent company, claims they use reputable suppliers. Some believe they are made by low-cost Chinese manufacturers like Prokan Grills, Nexgrill, Rankam Group, and Grandhall, but this isn’t confirmed.
Where is the Model Number on a Member Mark Grill?
The model number on a Member’s Mark grill is usually located on a sticker or plate on the back or inside the cabinet of the grill. You can also locate the model number by Check the owner’s manual.
Related Guides
How to Season Member’s Mark Griddle Properly
Member’s Mark Pro Series Grill vs Weber Performer Deluxe: Which is Better?